Florabest FAH 18 A1 - Manual (Page 60)

60
GB MT
Technical Data
Appliance
Motor voltage ............................... 18 V
Idling speed .................. 1100 min -1 (rpm)
Protection Class ...................................III
Runtime ............................. max. 50 min*
Cutting length .............................520 mm
Cutting capacity ............................15 mm
Weight (without battery charger) ...2.5 kg
Sound pressure level
(L
pA
) .................. 73 dB(A), K
pA
=3 dB(A)
Sound power level (L
wA
)
guaranteed .............................96 dB(A)
measured .........93 dB(A); K
wA
=3 dB(A)
Vibration (a
n
) ............................................
Rear handle ......... 2.0 m/s 2 , K=1.5 m/s 2
Front handle ........ 2.6 m/s 2 , K=1.5 m/s 2
Battery (NiMH)
Nominal voltage ........................... 18 V
Capacity ........................................ 1.5 Ah
Charging time ........................approx. 1 h
Recharger ....................................18MC01
Uptake voltage ......... 230-240V~50/60Hz
Nominal consumption ..................... 67 W
Voltage output .............................. 18 V
Recharging curren .........................1.95 A
Protection class ................................ II
Protection category .......................... IP20
* The actual runtime under load of a fully char-
ged battery depends on how you work and on
the load put on the trimmer during operation.
Noise and vibration values have been
determined according to the standards
and regulations mentioned in the declara-
tion of conformity. Technical and optical
changes may be undertaken in the course
of further development without notice. All
dimensions, references and information in
this instruction manual are therefore not
guaranteed. Legal claims made on the ba-
sis of the instruction manual can therefore
not be considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under
actual usage conditions (all parts
of the operating cycle are to be
considered, including, for example,
times during which the power tool
is turned off and times when the
tool is turned on but is running
idle).
Spare Parts
The following spares are available from
Grizzly Service-Center. Please indicate the
machine type and the number of the spare
part with your order.
Battery ....................................... 91094283
Battery charger ........................... 91094284
If further spare parts should be necessary,
please find the part number on the ex-
ploded drawing.