Florabest FRT 450 A1 - Manual (Page 9)

9
GB
• Never carry the equipment by its power
cable. Never pull the cable to discon-
nect the plug from the mains socket.
Protect the cable from heat, oil and
sharp edges.
General description
The illustrations are on the
front fold-out page.
Survey
1 Upper handle
2 ON / OFF switch
3 Power cable
4 Strain relief
5 Screw sleeve to adjust the
length
6 Telescopic tube
7 Motor head
8a+8b Two-part protection cover
9 Cutting head with line spool
10 Spacing bow (flower protection)
11 Knurled nut and screw
12 Additional handle
13 Line cutter
14 Locking button
15 String spool
Functional description
The portable, hand-guided lawn trimmer is
powered by an electric motor. The trimmer
features a dual line spool as the cutting
device.
For grass trimming there are two nylon
lines rotating parallel with ground level.
An additional chassis facilitates edge trim-
ming. A hood covering the cutting device
protects the user.
The following describes the functions of
the operating parts.
Extent of the delivery
Carefully unpack the trimmer and check
that it is complete:
• Lawn trimmer
• Two-part protection cover
• 3 cross recessed screws
• Spacing bow (flower protection)
• Additional handle with screw
• 1 replacement string spool
Assembling instructions
Always disconnect the plug be-
fore working on the trimmer and
wait until the cutting lines have
completely stopped. There is the
danger of electric shock and the
possibility of injury by the cutting
lines.
. Only.use.original.parts.and.
always.observe.the.line.cutter.
during.assembly.work.as.the.
line.cutter.(. .13).can.cause.se-
ries.injury!
You can assemble the protection
cover with or without a spacer.
.. . Adding.the.spacer.(optional):
1. Insert the spacer (10) into the
guide provided on the motor
head (7).
. . Assembling.the.protection.
cover:
2. Join both parts (8a+8b) of the
protection cover together. Fold
the grey part of the protection
cover (8b) downwards (see
small Fig).
3. Apply the protection cover (8) to