Crivit Z31037 - Manual (Page 34)

34 GB/MT
Remove the battery from the product if it has not been
used for a long period.
Before you insert or change the
battery, please make sure that the LC-display 2 is off.
Before use
Fasten the skipping rope 6 to the rope holder 7 and
set the correct rope length. Proceed as shown in fig A.
Remove the insulating strips before first use.
Inserting / replacing the battery
Proceed with the insertion / changing of the battery as
shown in fig. B and C.
Preparing for use
First enter your body weight (W), so that the computer
in the handle 1 can count the number of skips / rope
revolutions (L), the training duration (T) and the calorie
consumption (C).
Setting body weight:
1. Press the RESET / ON button
11 . The LC display 2
switches itself on.
2. Press the SET button 9 . The figure in the W box (weight)
on the LC display 2 flashes.
3. Enter your current body weight in kgs (20–110) by
means of the UP 10 and DOWN buttons 8 . Hold the
buttons down longer to speed up the input process.
4. Press the SET button 9 again to confirm the set body
weight.
Safety … / Before use / Preparing for use