Kichler 300008 - Manual (Page 6)

5
Fig. 12
Fig. 11
Fig. 10
Registration slot
Step 8. Slip coupling cover, decorative scroll
ring, decorative scroll assembly, canopy cover
and canopy onto downrod. Let canopy rest on
top of the decorative scroll assembly. Carefully
reinstall hanger ball onto rod being sure that
cross pin is in correct position, the set screw
on hanger ball is tight and wires are not
twisted. (Fig. 10)
Step 9. Install 6, 15 watt candelabra bulbs
(included). Install the decorative scroll
assembly onto the top of the motor housing
with the three screws provided. Then tighten
the set screws on the decorative scroll holder.
(Fig. 11)
Step 10. Now lift the motor assembly into
position and place the hanger ball into the
hanger bracket. Rotate until the "Check Tab"
has dropped into the "Registration Slot" and
seats firmly. (Fig. 12). The entire motor
assembly should not rotate if this is done
correctly.
Decorative scroll
assembly
Screws
Set screws
Bulbs
Downrod
Canopy
Decorative scroll
assembly
*Omit decorative
scroll when using the
minimum-length
downrod
Canopy cover
Set screws
Hitch pin
Lock pin
Coupling cover
Decorative scroll ring