A.4 console port pinout assignments, A.5 regulatory compliance, Console port pin assignments – Enterasys Networks C1H124-24 User Manual
Page 64: Compliance standards, Section a.4, Section a.5
Console Port Pinout Assignments
A-6
Specifications
A.4
CONSOLE PORT PINOUT ASSIGNMENTS
The Console port is a serial communications port that supports local management of the C1H124-48
and C1G124-24. These pin assignments differ from other Enterasys products. Refer to
for the Console port pin assignments.
A.5
REGULATORY COMPLIANCE
The C1H124-48 and C1G124-24 meet the safety and electromagnetic compatibility (EMC)
standards listed in
:
Table A-7
Console Port Pin Assignments
Pin
Signal Name
Input/Output
1
Transmit Data (TD)
Output
2
Clear to Send (CTS)
Input
3
Data Set Ready (DSR)
Input
4
Receive Data (RD)
Input
5
Signal Ground (GND)
NA
6
Request to Send (RTS)
Output
7
Data Terminal Ready (DTR)
Output
8
Data Carrier Detect (DCD)
Input
Table A-8
Compliance Standards
Compliance Standards
Safety
UL 60950, CSA C22.2 No. 60950, EN 60950,
73/23/EEC and IEC 60950. The 7G-6MGBIC also
meets the EN 60825, 21 CFR 1040.10 standards.
Electromagnetic Compatibility (EMC)
FCC Part 15, CSA C108.8, 89/336/EEC, EN 55022,
EN 61000-3-2, EN 61000-3-3, EN 55024,
AS/NZS 3548, VCCI V-3