Enterasys Networks C1H124-24 - Manual (Page 29)

Hardware Installation 3-1
3
Hardware Installation
This chapter provides the instructions required to install the device. Follow the order of the sections
as listed below to correctly install the device.
• Unpacking the device ( Section 3.2 )
• Installing options ( Section 3.3 )
• Installing the device (on a shelf or tabletop, or into a standard rack) ( Section 3.4 )
• Connecting to the network ( Section 3.5 )
• Connecting to console port for local management ( Section 3.6 )
• Completing the installation ( Section 3.7 )
3.1 REQUIRED TOOLS
A Phillips screwdriver is required to install the device into a rack.
ELECTRICAL HAZARD: Only qualified personnel should install the C1H124-48 and
C1G124-24.
NOTE: Read the Release Notes shipped with the C1H124-48 and C1G124-24 to check
for any exceptions to the supported features and operation documented in this guide.