Epson 51c - Manual (Page 45)

40 Fine-Tuning the Projector
■ About provides information about the current projector and
lamp settings, and lets you reset the lamp timer when you’ve
replaced the projector’s lamp.
■ Reset All restores the factory defaults to all the projector settings.
Changing Menu Settings
You use the Menu , Enter and Esc buttons on the remote control to
change menu settings.
1. To display the main menu, press the Menu button. The menus
are displayed on the left, and the options available for the current
menu are shown on the right.
2. Press the top or bottom of the Enter button to scroll up or down
through the menus and view the available options.
3. Press the center of the Enter button to select a menu. The
highlight moves to the first menu option for that menu.
4. Press the bottom or the top of the Enter button to scroll through
the options. Press the right or left side of the Enter button to
change the setting.
If you want to go back to the default settings on any menu, select
Reset , press Enter , select Yes , and then press Enter .
5. Press the Esc button to save your changes and go back to the
main menu.
6. Press the Menu button to exit the menu system.
The rest of this chapter describes the menu options.
Menu
button
Esc
button
Enter
button