Electrolux 64570 Vi User Manual
Page 9
9
2. Press function buttons 2 and 3 simultaneously and hold them down.
The LED indicators for function buttons 1 to 3 will flash.
3. Press function button 1.
The LED indicator for function button 1 will flash.
The multi-display will indicate the hardness setting.
4. Pressing function button 1 increases the hardness setting by 1.
(Exception: hardness setting 1 follows hardness setting 10).
5. When the hardness setting is correct, press the ON/OFF button.
The hardness setting is now saved.
If the water softener is set electronically to “1”, this switches off the
control indicator for dishwasher salt.
Water hardness
Adjusting the hardness
setting
Indication on the
multi-display
in °fh
1)
)
1) (°fh) French degree, measure of the hardness of water
in °dh
2)
)
2) (°dh) German degree, measure of the hardness of water
90 - max. 125
76 - 89
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
07 - 18
51 - max. 70
43 - 50
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
10
3)
9
8
7
6
5
4*
3
2
3) On this setting the length of the dishwashing cycle may be slightly longer.
*) factory setting
10L
.
9L
8L
7L
6L
5L
4L
3L
2L
below 7
below 4
1
no salt necessary
1L