Eureka 4700 Series - Manual (Page 18)

FIG. 16a
18
ENGLISH
HOW TO USE
(continued)
Step 7: Use Handle Release. Step on handle release (FIG. 16a) and pull
handle back to a comfortable position. Press again to lower
handle further to clean under furniture. Return to full upright
position to use the hose and attachments (FIG. 16).
Helpful hint: Before cleaning under low furniture, check area first for
objects that might harm the unit or block the vacuum hose.
Step 8: Auto Height Setting. The cleaner has the optimal setting for carpet
cleaning and will adjust to the appropriate surface. The brushroll
must reach the carpet for effective cleaning.
WARNING: Avoid injury. Keep loose clothing, hair, fingers, and all
other parts of body away from any moving part (such as
the revolving brush).
FIG. 16 FIG. 17
FIG. 16
FIG. 18
●
B
●
A
●
C
HOW TO USE ACCESSORIES
CAUTION: Do not place cleaner on furniture or steps for any period
of time as the brushroll may cause damage. Place cleaner
on floor with the handle in storage position while using
accessories.
Step 1: Remove hose from hose adapter on the base of cleaner.
Step 2: Place desired accessory onto end of hose or wand.
Nested Extension Wand
●
A to add reach. Grasp both wands near ridges.
Pull apart. Turn ridge end to center. Push wands together (FIG. 17).
Crevice Tool
●
B cleans corners, baseboards, between cushions.
Dusting/Upholstery Brush
●
C is for furniture, blinds, books,
lampshades, shelves, curtains, draperies, cushions and fabrics.
ROUTINE MAINTENANCE
How to Check and Clear Hose Blockages
Low suction or poor pickup may be due to a blockage in the vacuum
cleaner.
Step 1: Remove hose from hose retainer on the base and check suction
at end of hose - if little or no suction, check dust cup. Empty if
needed. If no improvement, proceed to step 2.
CAUTION: Turn off the switch and unplug the electrical cord before
clearing hose.
Step 2: Remove electrical cord from cord hooks. Disconnect the clear tube
by unscrewing the 2 screws, then lift away from cleaner. Check for
any obstructions that may be in the tube or hose. Any obstructions
can be removed by using a blunt instrument to clear the tube or
hose. Flexing the hose may help loosen the blockage. After clearing
blockage, reverse above steps to reassemble unit (FIG. 18).