How to use – Eureka 4700 Series User Manual

Page 14

Text mode
Original mode

ENGLISH

HOW TO USE

CAUTION: Do not plug in cleaner until you understand all controls

and features.

Step 1: Plug in Vacuum. (FIG. 10) Unwrap the cord by turning the quick

release cord hook (FIG. 10a), unwind the cord and plug into an
appropriate outlet. The plug has a wider prong that will only fit
one way into the receptacle (FIG. 10b).

FIG. 10

FIG. 11

FIG. 12

(CONTINUED)

FIG. 11a

FIG. 10b

FIG. 10a

Step 2: Put Cord on Cord Retainer. To use, push electrical cord down

into cord retainer (FIG. 11a). You will find your cord retainer on
the handle above the upper cord hook. This will place the cord
out of the way the next time you vacuum (FIG. 11).

Step 3: ON/OFF Switch. The ON/OFF Switch is on the base. Press once

to turn on and press again to turn off (FIG. 12).