Powerplus POWXG9002 HIGH PRESSURE CLEANER 2100W EN - Manual (Page 9)

POWXG9002
EN
Copyright © 2010 VARO P a g e | 9 www.varo.com
8.4 Patio cleaner
1. Patio cleaner
2. Adaptor
3. Extension
4. Metal spray gun
Assembly :
Connect the extension to the patio
cleaner (turn until it locks).
Rotate the adaptor into screw thread of
the metal spray gun.
You can decide whether to use the extension wand or not, according to the situation. When
you choose not to use the extension, you can connect the patio cleaner directly to the metal
spray gun.
Height adjustment of the fan.
You can adapt the height-of the fan, according to surface you want to clean, to in/decrease the
spray power. Pull back the sliding piece along the arrow shown on the patio cleaner, then pull
the buckle up.
fig. 1
You can adjust the water flow of the patio cleaner for the task being performed. The water flow
can be adjusted by turning the flow-adjusting device shown in figure above.
8.5 During cleaning.

The distance between the nozzle and the objects surface should not be more than 30cm.
(the power is opposite proportional with the distance to the object)

hold the gun trigger firmly during cleaning.
2
3
4
1