Powerplus POWXG9002 HIGH PRESSURE CLEANER 2100W EN - Manual (Page 4)

POWXG9002
EN
Copyright © 2010 VARO P a g e | 4 www.varo.com
 Avoid accidental starting. Ensure the switch is in the off position before plugging in.
Carrying power tools with your finger on the switch or plugging in power tools that have the
switch on invites accidents.
 Remove any adjusting key or wrench before turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool may result in personal injury.
 Do not overreach. Keep proper footing and balance at all times. This enables better control
of the power tool in unexpected situations.
 Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery or long hair can be caught in moving
parts.
 If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used. Use of these devices can reduce dust related
hazards.
5.4 Power tool use and care
 Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
 Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
 Disconnect the plug from the power source before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
 Store idle power tools out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool. Power tools are dangerous in
the hands of untrained users.
 Maintain power tools. Check for misalignment or sticking of moving parts, breakage of parts
and any other condition that may affect the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly maintained power
tools.
 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to stick and are easier to control.
 Use the power tool, accessories and tool bits etc., in accordance with these instructions and
in the manner intended for the particular type of power tool, taking into account the working
conditions and the work to be performed. Use of the power tool for operations different from
intended could lead to a hazardous situation.
5.5 Service
 Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
6 SPECIFIC SAFETY WARNINGS
WARNING: When using this product, basic precaution should always be followed, including
the following:

Don’t use this High Pressure Cleaner (HPC) without reading these instructions.
 Do not direct output at persons or animals :Risk of injection or injury
 High-pressure jets can be dangerous if subject to misuse. Do not direct at electrical
equipment or the appliance itself.
 Don’t direct the jet against yourself or others in order to clean clothes or foot-wear.
 Disconnect from the electrical power supply before carrying out user maintenance.
 High-pressure cleaners shall not be used by children or untrained personnel.
 High-pressure hoses fittings and couplings are important for the safety of the appliance.
Only use original hoses, fittings and couplings. Don’t use the HPC if any important part is
damaged.