Powerplus POWX075 TELESCOPIC MITRE SAW 2000W 305MM EN - Manual (Page 9)

POWX075
EN
Copyright © 2014 VARO P a g e | 9 www.varo.com
9.4 Dust extraction (fig. J)
The dust extraction outlet together with an external vacuum cleaner takes care of the dust
extraction of the working surface.
 If necessary, connect an adapter to the connection (17).
 Connect a vacuum cleaner to the machine.
If you want to use the dust bag:
 Slide the dust bag (37) onto the connection (17).
 Regularly empty the dust bag to ensure optimum dust extraction.
10 CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull the power
plug.
10.1 Cleaning
 Keep the ventilation slots of the machine clean to prevent overheating of the engine.
 Regularly clean the machine housing with a soft cloth, preferably after each use.
 Keep the ventilation slots free from dust and dirt.
 If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
10.2 Lubrication (fig. D)
 From time to time, apply a drop of oil to the thread of the fixing screw (24).
11 TECHNICAL DATA
POWX075
Voltage / frequency 230-240 V~50 Hz
Power input 2000 W
No load speed 4200 min-1
Blade size (TCT) Ø 305 x Ø 30 x 3.0 mm – 80T
Max.cutting capacity:
0°-90° 310x95(wxh) mm
45"-90° 215x95(wxh) mm
0°-45° 310x60(wxh) mm
45"-45° 215x60(wxh) mm
12 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
99 dB(A)
Acoustic power level LwA 112 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration) 1,2 m/s² K = 1,5 m/s²