Casio SE-S3000 Manual - Manual (Page 82)

E-82
Advanced programmings and registrations
Programming PLU functions in a lump
This method programs functions of a PLU at one time.
Step Operation
1
Turn the Mode switch to PGM position and select [System
Setting] then press F key.
> ▪▪▪▪▪ >F
2
Enter 3 and press o key to set the register in the
programming mode.
3o
3
Enter four-digit PLU number then press + key. 0014+
For example, to program PLU number
fourteen.
4
Referring the table in the previous section, input 12- digit
program code.
BB ▪▪▪▪▪ BB
[Program code (12 digits)]
5
Press F key.
F
6
Repeat steps 3 through 5 if you wish to program functions
in another PLU.
7
Press o key to complete the program. o