EVGA nForce 123-YW-E175 - Manual (Page 43)

EVGA
FSB & Memroy Config
From this menu, you are able to specify frequency settings and memroy settings.
Phoenix – AwardBIOS CMOS Setup Utility
FSB & Memory Config
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F7:Defaults
Main Level
“CPUOC MAX” realizes
the complete optimized
memory settings when
SLI-Ready memory is
installed
Optimized memory
settings by allowing
X% CPU overclocking
CPU overclocking may
require manual
overvolting of the CPU
to improve system
stability
Item Help
Parameters Settings Current Value
Current CPU Freq, MHz 2400.0 2400.0
CPU Multiplier [12X] 12X
FSB - Memroy Clock Mode [Auto]
x FSB - Memory Ratio Auto
x FSB (QDR), MHz Auto 800.0
Actual FSB (QDR), MHz 800.0
x MEM (DDR), MHz Auto 800.0
Actual MEM (DDR), MHz 800.0
Memory Timing Setting [Press Enter]
ECC Control [Disabled]
ECC Uncorrectable [Disabled]
ECC Correctable [Disabled]
FSB - Memroy Clock Mode
Use the Page Up and Page Down keys to scroll through the FSB and Memory Clock Mode
options. The options are:
Auto
This is the optimal setting since it sets the FSB and memory speeds automatically.
Linked
When Link is selected, FSB (QDR), MHz is changed to editable and the FSB speed can be
entered manually. As the FSB speed is changed, CPU Freq, MHz changes proportionally.
CPU Freq, MHz 2400.0 2400.0
CPU Multiplier 11X 11X
FSB – Memory Clock Mode [Linked]
FSB (QDR), MHz [1067] 1066.7
Actual FSB (QDR), MHz 1066.7
x MEM (DDR), MHz Auto 800.0
Actual MEM (DDR), MHz 800.0
Unlinked
When Unlink is selected, FSB (QDR), MHz and MEM (DDR), MHz are changed to editable
and the FSB and memory speeds can be entered manually. As the FSB speed is changed, CPU
Freq, MHz changes proportionally.
FSB – Memory Clock Mode [unlinked]
FSB (QDR), MHz [1067] 1066.7
Actual FSB (QDR), MHz 1066.7
MEM (DDR), MHz [1067] 800.0
Actual MEM (DDR), MHz 800.0