EVGA nForce 123-YW-E175 - Manual (Page 39)

EVGA
Mouse Left
Mouse Right
Any Key
PWRON After PWR-Fail
This item enables your computer to automatically restart or return to its last operating status after
power returns from a power failure.
Off: The system stays off after a power failure.
On: The system stays on after a power failure.
PnP/PCI Configuration Menu
Select PnP/PCI Configuration from the CMOS Setup Utility menu and press Enter to display the
PnP/PCI Configuration menu.
Phoenix – AwardBIOS CMOS Setup Utility
PnP/PCI Configuration
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F7:Defaults
Main Level
Item Help
Init Display First [PCI Slot]
Reset Configuration Data [Disabled]
Resources Controlled By [Auto(ESCD)]
x IRQ Resources Press Enter
PCI/VGA Express Snoop [Disabled]
** PCI Express relative items **
Maximum Payload Size
[4096]
Init Display First
This function on the PnP/PCI Configuration menu allows you to define if the initial display is in the
PCI slot or in the PCI Express slot. Options are [PCI Slot] and [PCIEx].
Reset Configuration Data
This function on the PnP/PCI Configuration menu allows you to enable or disable the resetting of
Extended System Configuration Data (ESCD) when you exit Setup. Set this to [Enabled] if you have
installed a new add-on and the system reconfiguration has caused a serious conflict that prevents
the OS from booting. The default setting is [Disabled].