Resources controlled by, Irq resources, Pci/vga palette snoop – EVGA nForce 123-YW-E175 User Manual
Page 40: Maximum payload size
nForce 750i SLI Motherboard
Resources Controlled By
This function on the PnP/PCI Configuration menu allows you to define if the BIOS can
automatically configure all the boot and plug-and-play compatible devices or if you can manually
select IRQ, DMA, and memory base address fields. Select [Auto(ESCD)] if you want the BIOS to
automatically populate these fields. If you select [Manual] so you can assign the resources, IRQ
Resources is enabled for input.
IRQ Resources
To enable this field for input, set Resources Controlled By to [Manual]. With this field enabled, press
Enter to see options.
IRQ-5 assigned to
[PCI Device]
IRQ-9 assigned to
[Reserved]
IRQ-10 assigned to
[PCI Device]
IRQ-11 assigned to
[PCI Device]
IRQ-14 assigned to
[PCI Device]
IRQ-15 assigned to
[PCI Device]
Use Legacy ISA for devices compliant with the original PC AT Bus specification. Use PCI/ISA
PnP for devices compliant with the plug-and-play standard, whether designed for PCI or ISA Bus
architecture.
PCI/VGA Palette Snoop
This function on the PnP/PCI Configuration menu allows you to enable or disable the Palette Snoop
function.
Maximum Payload Size
This function on the PnP/PCI Configuration menu allows you to set the maximum TLP payload
size (in bytes) for the PCI Express devices. Use the Page Up and Page Down keys to scroll through
sizes or enter the number using the keyboard numbers or use the + and – keys to go up and down
the list of sizes.