Casio XW-DJ1 Tutorial - Manual (Page 14)

EN-12
Deckadance2 for Windows
After you install this driver software, you can use the
Casio Control Panel to adjust TRACKFORMER
settings.
• To display the Casio Control Panel: Windows Start
→ All programs → CASIO → XW-DJ1 → Casio
Control Panel
• You can also open the Casio Control Panel by
clicking the icon in the Windows taskbar.
The USB Streaming Mode and ASIO Buffer Size
settings on the Buffer Settings tab can be used to
control audio latency.
USB Streaming Mode Setting
This setting adjusts audio latency.
ASIO Buffer Size
This setting adjusts the data buffer size.
IMPORTANT!
• Before changing the USB Streaming Mode setting,
first exit all other applications running on your
computer.
• A message like the one shown below may appear
when you change the ASIO Buffer Size setting. This
message is a warning that your computer’s
operation speed is lower than the audio delay setting
you selected, which may cause distortion and
breaking of audio during playback.
In this case, select Safe or Extra Safe for USB
Streaming Mode, and set a larger value for ASIO
Buffer Size.
Driver Software Control Panel
Operations
Minimum Latency (Fast)
Low Latency
Standard
Relaxed
Reliable
Safe
Extra Safe (Slow)
64 sample (Small size: fast)
128 sample
256 sample
512 sample
1024 sample
2048 sample
4096 sample
8192 sample (Large size: slow)
Precautions when Connecting
to a Computer
If your computer does not recognize TRACKFORMER...
• Check if your computer meets the Deckadance2
system requirements.
• Try connecting to a different USB port on your
computer.
• Make sure you are using a High Speed
compatible (USB 2.0) USB cable.
• Connect directly to a computer USB port,
without going through a USB hub.
• Shutdown or exit all Wi-Fi, Bluetooth, or other
applications, and anti-virus software.
• Try shutting down camera, and/or game
controller drivers running on your computer.
• Clean up the MIDI driver registry. Cleaning the
MIDI driver registry requires a high level of
technical skill. Be sure to check relevant
information on the Microsoft Support Page
before attempting it.
• Uninstall the driver software from your
computer and then re-install it.