Casio PX-700 - Manual (Page 44)

44
Note 3:
See "25.7 Pan Setting Value Table".
Note 4:
This specifies the volume of data sent from System Chorus to System Reverb.
Note 5:
When "Bypass" is specified for "DSP Line Bypass," the DSP Line Select settings of all parts are disabled, and all
DSP lines are treated as if they are turned off. This means that notes that are currently sounding are not affected.
System Chorus
Note 1:
Selects the System Chorus preset type. Receipt of GM/GS Reset selects Chorus3. The other Master Equalizer
parameters are changed to preset values in accordance with this type value. See "25.11 Chorus Type Setting Value
Table."
Note 2:
Sets the System Chorus feedback volume.
Note 3:
Adjusts the System Chorus timbre.
System Reverb
Note 1:
Selects the System Reverb preset type. Receipt of GM/GS Reset selects Hall2. The other Master Equalizer
parameters are changed to preset values in accordance with this type value. See "25.10 Reverb Type Setting Value
Table."
ParamID Parameter bit Value Default Setting Value (Decimal)
10 Chorus Macro Num (Note 1) 05 00-0F 02 0-15
11 Chorus Level 07 00-7F 40 0-127
12 Chorus Rate 07 00-7F 03 0-127
13 Chorus Depth 07 00-7F 13 0-127
14 Chorus Feedback (Note 2) 07 00-7F 00 0-127
15 Chorus Tone (Note 3) 07 00-7F 7F 0-127
ParamID Parameter bit Value Default Setting Value (Decimal)
18 Reverb Macro Num (Note 1) 05 00-0F 04 0-15
19 Reverb Level 07 00-7F 40 0-127
1A Reverb Time/Del Feedback 07 00-7F 40 0-127
1B Reverb ER Level 07 00-7F 40 0-127
1C Reverb Hi Damp 07 00-7F 40 0-127
1D Reverb Tone 07 00-7F 7F 0-127