Casio EX-TR200 - Manual (Page 20)

20
Quick Start Basics
Back Lamp Operation
USB Cable Connection Precautions
• When connecting the USB cable to the camera, make sure that the cable
connector and monitor screen panel are oriented correctly as shown in the
illustration below.
• Make sure that you insert the cable connector into the USB port until you feel it
click securely into place. Failure to insert the connector fully can result in poor
communication or malfunction.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
Lamp Status Description
Lit Red Charging
Flashing Red
Abnormal ambient temperature, USB-AC
adaptor problem, or battery problem
(page 111), or charging terminated by the
timer
Off Charging complete
Back lamp
Make sure that the 6 mark side of
the USB cable connector and the
front of the monitor screen panel (the
side opposite that of the monitor
screen) are facing in the same
direction.
Front of monitor screen panel
The back lamp always initially light after charging starts. Even if the battery is
already fully charged, the lamp will light momentarily.
If the lamp does not light, check the orientation of the USB cable connector.