Specifi cations – Casio DT-X7 User Manual

Page 55

E-53

When placing the DT-X7, make sure that it is seated properly and that the

power LED at the front of the Ethernet Cradle is lit in green. Charging and

communication will not proceed properly if the Handheld Terminal is not

mounted properly.
Always cap ports that are not being used. Using the Ethernet Cradle while the

ports are uncapped can cause damage.

Specifi cations

1. LAN Specifi cations

Communications protocol: IEEE 802.3
Media type:

10base-T/100base-TX auto-switched

2. USB

Protocol: USB

Ver1.1

Standard

Transmission rate:

12Mbps (max.)

3. Charging

Charging Method:

Constant current/voltage

Charge Period:

Approximately 3 hours (battery pack)

Approximately 5.5 hours (large-capacity battery pack)

4. Power Supply

Power Source:

AC adaptor (AD-S42120B*)

Consumption Current:

12V DC approximately 1.5A

Output to Handheld Terminal: 5V DC 1.6A (max.)
USB Host Output:

5V DC 0.5A (max.)

5. AC Adaptor

Model: AD-S42120B
Input:

100V to 240V AC 50/60Hz 1.2A

Output:

12V DC 3.5A

6. Dimensions and Weight

Dimensions:

Approximately 93(W)

× 83(D) × 101(H) mm

⁄

× 3

⁄

× 4"H)

Weight:

Approximately 280g (9.9oz)

7. Operating Environment

Temperature:

0°C to 40°C (32°F to 104°F)

Humidity:

30% to 80% RH (non-condensation)

*See page 47.

•