Casio DT-X7 - Manual (Page 52)

E-50
1 USB Client Port This port is used to transmit data and fi les (download, upload)
by connecting the Ethernet Cradle to a PC using a USB cable
(DT-380USB). The dedicated driver must be installed in the PC
before connecting the Ethernet Cradle to the PC.
2 USB Host Port This port is used to connect a corresponding USB peripheral
device.
3 Selector Switch This switch is used to switch between a USB connection and a
LAN connection.
4 LAN Connection
Status LED This LED shows the status of the LAN connection.
Off: LAN cable not connected correctly.
Lit green: LAN cable connected correctly.
5 LAN
Communication
Status LED This LED shows the LAN operation status.
Off: No communication.
Blinking green: Communication in progress.
6 LAN Port This port is used for connecting the cradle to a PC or hub via a
LAN cable so that data and fi les can be transmitted (uploaded or
downloaded).
The special driver software must be installed in the DT-X7.
7 AC Adaptor Jack Connect the AC adaptor here.
8 Terminal Detect
Switch This switch detects when the DT-X7 is seated correctly on the
Ethernet Cradle.
9 Power Contacts Power is supplied to the DT-X7 via these contacts.
10 Communication
Terminal
Used for communications.
11 Power LED This LED indicates the power status and the mounting status of
the DT-X7.
Off: DT-X7 is not installed. Or, the AC adaptor is not connected.
Green: Power on, DT-X7 mounted correctly.