Casio DT-X7 - Manual (Page 37)

E-35
Using the Linear Imager (DT-X7M10U)
1. After turning on the power, position the reader port close to a bar code and then press
the Trigger key.
2. The LED emits light and scans the bar code. When scanning is completed normally,
Indicator 2 displays a green light and a buzzer sounds.
Important!
If you are unable to scan a bar code, try changing the angle at which the
Handheld Terminal is held or distance between the reader port and the bar
code, and then try scanning again.
This Handheld Terminal is capable of scanning bar codes at a distance of
about 60-300 mm (2
6 /
16
"-11 13 /
16
"). Furthermore, the distance at which scanning
is possible may vary according to the bar code symbology.
Warning Label
Warning!
■ Never look directly into the LED light.
This product scans using LED light. Never look directly into the LED light
or shine the LED light into the eyes.
About the Class 1 LED Label
This label identifi es the Handheld Terminal as a Class 1 LED product
compliant with IEC60825-1 (ed.1.2).
•
•
•
•