Casio EXILIM Remote 3.0 - Manual (Page 9)

9
2.
On your camera, touch the “ ” (Remote Capture) icon.
3.
On your smartphone, start up the EXILIM Remote app.
This will establish a connection between the smartphone and your camera.
• About 60 seconds after your camera establishes a connection with the
smartphone, the camera’s monitor screen will go blank and its back lamp will
light green.
• If the message “Connect your phone to the access point below.” remains on
the camera’s monitor screen, change the smartphone’s Wi-Fi settings so your
camera is selected for connection (page 7).
4.
Compose the image on your smartphone’s screen as you shoot.
• After you are finished using Remote Capture, touch “Exit” on the camera or exit
the app on your smartphone. For details, see the user documentation that
comes with your digital camera.
.
Camera Limitations
Depending on the model of the camera being used there may be limitations on
shooting. Equipped functions depend on the camera model.
• The Movie Quality is always STD (640
x
480) when shooting with Remote Capture.
• “O Tracking” cannot be selected for the AF area setting while shooting with
Remote Capture. If “O Tracking” is selected in another mode, selecting Remote
Capture will cause the AF area setting to change to “U Spot”.
• The Motion Shutter (Handsfree) cannot be used while shooting with this function.
• High Speed CS and Prerecord CS can be used in any recording mode other than
Premium Auto Pro. Configure CS Speed, Maximum CS Shots, and Pre-record CS
Shots settings on the camera before establishing a wireless LAN connection.
• In the case of Prerecord CS, tapping the “PAST” button at the bottom of the
smartphones screen will start continual pre-recording of images to a temporary
buffer. After that, tapping the shutter button
8 (see below) will record the number
of images specified by “Maximum CS Shots” (pre-recorded images plus real-time
recorded images).
• When the focus mode setting is “AF” (Auto Focus) or “Macro”, continuous AF is
enabled during Remote Capture and focus is performed in the center of image.
• If the camera you are using has a pop-up flash unit and you want to use it, be sure
to pop up the flash unit before shooting.