Casio EX-FC500S - Manual (Page 60)

60
Snapshot Tutorial
8.
Use [4] and [6] to select the continuous shutter (CS) speed you want.
• Use a higher “High Speed CS fps” setting when shooting a fast-moving subject.
9.
Use [8] and [2] to select the (Maximum CS Shots) Control Panel
option.
10.
Use [4] and [6] to select the maximum number of shots.
11.
Use [8] and [2] to select the (Pre-record CS Shots) Control Panel
option.
12.
Use [4] and [6] to select the number of Prerecord (Still) images and
then press [SET].
• Settings: 0 shots, 3 shots, 5 shots, 10 shots, 15 shots, 20 shots, 25 shots
• If you select “0 shots”, no pre-record images will be stored when you half-press
the shutter button.
13.
Half-press and hold the shutter button to start pre-recording.
A pre-record buffer is continually updated with images as long as the shutter
button is pressed.
• The camera will not emit shutter sounds as it pre-records images.
• Releasing the half-pressed shutter button will cause the contents of the pre-
record buffer to be deleted.
14.
Full press and hold down the shutter button.
This will record the images in the pre-record buffer followed by real-time recorded
images. Shooting of images will continue as long as you depress the shutter or
until the maximum number of images specified by “High Speed CS fps” is
reached.