Casio EX-FC500S - Manual (Page 165)

165
Using the Camera to Record and Analyze a Golf Swing
8.
Press [MODE].
This will start movie playback during which you can view the arc of the club head
and check for any vertical or horizontal movement.
• You can create a new movie file with the guidelines built into the moment of
impact movie by pressing [SET] during movie playback to pause it, and then
pressing [0] (Movie).
You can use the procedure below to insert guidelines into a movie you recorded with
“Slow motion impact”, and analyze the moment club to ball impact.
1.
Press [p] (PLAY), and then use [4] and [6] to select the movie that
shows the moment of impact.
2.
Press [SET] to start playback, and then press [SET] again to pause
playback.
3.
Press [8] (DISP) to enter the impact display
mode.
• This displays angle of inclination values to appear
on the monitor screen.
4.
Press [MODE].
5.
Use [8], [2], [4], and [6] to align the
reference point on the red line with the center
of the ball. Next, rotate the zoom controller to
align the red line with the flight path of the
center of the ball.
• Changing the angle of the red line will cause the
displayed angle of inclination (yellow part) and the
red angle value to change accordingly.
6.
Press [SET].
To analyze the Moment of Impact
R (red) : Angle formed at the intersection of
the red line and horizontal.
G (green) : Angle formed by the intersection of
the green line and horizontal.
Reference point