Casio EX-FC500S - Manual (Page 163)

163
Using the Camera to Record and Analyze a Golf Swing
7.
Rotate the zoom controller to change the
angle of the blue line so it is aligned with the
golfer’s shoulder, and then press [SET].
• Changing the angle of the blue line will cause the
displayed angle of inclination (yellow part) and
the blue angle value in the upper left corner to
change accordingly.
8.
Use [8], [2], [4], and [6] to align the
reference point (the point where the red line
and the green line intersect) with the golfer’s
hip. Next, rotate the zoom controller to
change the angle of the green line so it runs
from the hip to the shoulder.
• Changing the angle of the green line will cause
the displayed angle of inclination (yellow part)
and the green angle value in the upper left
corner to change accordingly.
9.
Press [MODE].
This starts playback. Use the lines to check the golfer’s swing plane.
• You can create a new movie file with the guidelines built into the moment of
impact movie by pressing [SET] during movie playback to pause it, and then
pressing [0] (Movie).
Blue line Reference
point
Green line Reference
point