Ericsson BS120 - Manual (Page 12)

12
Not
fo
r C
om
me
rc
ia
l Use
Er
icsso
n
Mo
bi
le
C
omm
un
ic
ations
AB
A brief guide
Having installed the cordless telephone system you can now
make and receive calls. For initial use it is assumed that
you are near to the home base station.
Switching on
Before you can use the cordless phone you must switch
it on:
• Press On for at least one second to switch the
cordless phone on.
The number ‘1’ appears on the display. This is the
internal number of the cordless phone.
Making a call
Check whether the set is installed correctly by
dialling a number you know.
1. Press and you can hear the dial tone.
The red light appears on the home base station.
2. Dial the number you want to call using the
numeric keys.
You will hear the telephone ring.
3. Wait for an answer and, on completing your call,
ask the person to call you back.
4. Press again to end the call.
The duration of the call is displayed.
If you dialled a number and still hear the dial tone,
you probably have to set the home base station to
another dialling method. See “Tone or pulse dialling”
under “Settings” for more details.
Receiving a call
If you are called the cordless phone and the home base
station ring.
1. Press to answer the call.
2. Hold a conversation.
3. Press again to end the call.
The duration of the call is displayed.
What to do with the cordless phone
While you are not using the cordless phone you can
place it in the home base station.