Curtis TID5030 - Manual (Page 9)

IMPORTANT:
All messages will be deleted when battery is removed..
RADIO OPERATION INSTRUCTION
z AM/FM band selector … Slide this selector to either AM or FM to select the desired radio
band.
z TUNING KNOB … Turn this knob to the desired radio station.
z VOLUME KNOB CONTROL … To regulate the loudness of the radio, rotate the
CONTROL clockwise to desired position. If you wish to be aw3akened preset time by the
“Buzzer” rotate the CONTROL counter-clockwise until a “click sound is heard.
z TIME SET BUTTON … press this button simultaneously with the HOUR or MINUTE
button to set the desired time.
z HOUR AND MINUTE button … Use these buttons to set the time, while pressing the Alarm
set button or Sleep button.
z AUTO/OFF/ON/SWITCH … slide the switch to turn radio “ON”, “OFF” or to “AUTO”
position. When the switch is in the “AUTO” position, it will permit automatic turning “ON”
and “OFF” of the radio according to the sleep and alarm settings.
z ALARM SET BUTTON … Press this button simultaneously with the HOPUR or MINUTE
button to set the desired wakeup time.
z SLEEP SET BUTTON … Press this button to display the number of minutes (59 or less)
where the radio will sound for 59 minutes and will automatically turn off after then.
z SNOOZE BUTTON … When you are awakened by music or buzzer but wish to sleep a few
to sleep a few minutes more, simply touch the “snooze” button and it will shut off the music
or buzzer for approximately 5 to 10 minutes before the music or buzzer sounds again. This
can be repeated several times.
USING THE RADIO
1. Adjust the Radio On/Off/Auto switch to the “ON “Position.
2. Set the AM/FM band switch to the desired frequency.
3. Set the radio to the desired station using the TUNING knob.