Epson POWERLITE 5010E - Manual (Page 65)

Maintenance
65
7. Lift up the lamp handle and gently pull the lamp out of the projector.
Warning: The lamp(s) in this product contain mercury. Please consult your state and local
regulations regarding disposal or recycling. Do not put in the trash.
8. Gently insert the new lamp into the projector and press the handle down. Tighten the
screws.
Caution: Don’t touch the glass portion of the lamp assembly. Touching the glass could result
in premature lamp failure.
9. Replace the lamp cover. (The projector won’t work if the lamp cover is open or loose.)