Epson POWERLITE 5010E User Manual
Page 53
Making Detailed Adjustments
53
Follow these steps to adjust the projector’s LCD alignment:
1. Press the
Menu
button on the remote control. Select
Extended
from the main menu,
and then select
LCD Alignment
. You see the following displayed on the screen:
2. Set the
Correct LCD Align.
setting to
On
.
3. Set
Select Color
to
R
to adjust the red color convergence, or set it to
B
to adjust the blue
color convergence.
Note: You can only adjust the red or blue color convergence. Green is the standard color panel
and cannot be adjusted.
4. Select a
Pattern Color
.
5. Select
Start Adjustments
, and then press the
Enter
button on the remote control when
the confirmation screen appears. You see a grid pattern displayed on the screen:
This manual is related to the following products: