Epson POWERLITE 5010E - Manual (Page 64)

64
Maintenance
Follow these steps to replace the lamp:
1. If the projector is on, press the P power button on the projector twice or the Standby
button on the remote control and wait for the power light to stop flashing.
2. Turn off the power switch on the back of the projector and unplug the power cord and
any cables.
3. Wait about an hour to make sure the lamp is no longer hot.
4. Loosen the screw securing the lamp cover.
5. Remove the lamp cover as shown.
6. Loosen the screws securing the lamp (they don’t come all the way out).