Making other connections – Epson POWERLITE 5010E User Manual
Page 19
Setting Up the Projector
19
Making Other Connections
Connect the power cable and other cables described below, depending on how you plan to
use the projector.
■
Plug the power cable into the projector and a grounded electrical outlet.
■
To use an AV controller with the projector, connect a 9-pin null modem serial cable to
the
RS-232C
port.
■
To connect external devices such as motorized screens, connect a mini-jack stereo (3.5
mm) cable to the
Trigger Out
port and set the Trigger Out menu option to
On
. See
page 52 for more information. The Trigger Out port uses a 12V DC (200 mA max)
signal.
■
To connect the optional External IR 3D Emitter, attach a shielded twisted pair Category
5, RJ45 straight network cable (make sure to use a regular Ethernet network patch cord,
not a crossover-type cable) of no more than 32 feet (10 m) to both the emitter and the
External 3D IR port on the back of the projector. See page 9 for part number and
ordering information.