Logitek Electronic Systems ROC User Manual
Page 22
Logitek ROC Reference Manual
Page 22
Monitor Hotkey Addressing
There are four monitor hotkeys that may be addressed in Command Builder to route sources to the
control room monitors, headphones, and studio monitors.
The buttons are labeled SEL1, SEL2, SEL3, and SEL4.
SEL 1 is bus 16. SEL 2 is bus 17. SEL 3 is bus 18, and SEL4 is bus 19.
The device numbers are as follows:
Port Number
Monitor
Headphones
Studio
1
Device 24
Device 25
Device 23
2
Device 4C
Device 4D
Device 4B
3
Device 62
Device 65
Device 61
Alternatively, d[device] notation in Command Builder, such as d[Port1 Monitor In] is
valid and will be properly translated by Command Builder.
Illustration 2: Monitor Hotkeys