Logitek Electronic Systems JetStream Audio Networking Platform - Manual (Page 40)

Assigning an Output to the Network
In AE Config, create a new output. Assign it the appropriate number of channels (1 for mono, 2 for
stereo). Give it a Unique Name and surface label. For example, let’s put program out on the
network for another studio to listen to:
The Unique Name and Surface Label will be transmitted to all other JetStreams on the network.
The Surface Label will appear on the control surface (console) and the Unique Name will appear in
the JetStream Server software where you are assigning the sources to the faders and destinations.
The Unique Name is a good place to put studio names (ie “Studio 1 Mic 1” whereas on the console
itself you may only want to call it “Mic 1.” The Unique Name should be unique throughout the
entire system. It is acceptable to have identical surface labels so long as they don't both appear on
the same control surface.
In our example, “Pgm to net” will appear on the other JetStreams. In your environment, you would
probably want to have your call letters or studio name there: “Studio A Program” “KUHF Program”
or “WKDF Aux 1.”
In Number of Channels, put 1 for mono and 2 for stereo.
Logitek JetStream MINI Reference Manual 40