Logitek Electronic Systems JetStream Audio Networking Platform - Manual (Page 24)


See Appendix C for connector pinouts.
JSM-MICIN-RJ Analog Input Card
The JSM-MICIN-RJ card provides 4 microphone pre-amplified inputs using RJ-45 connectors,
following the StudioHub+ wiring standard. Trim pots to the left of the slot provide precise level
adjustment. The top LED will blink like a meter when audio is present and the bottom LED will turn
on when Phantom Power is turned on.
 TIP: The trim pots must be used for gain changes of more than 4 dB to preserve the
signal to noise ratio!

See Appendix C for connector pinouts.
JSM-MICIN-DB Analog Input Card
The JSM-MICIN-DB card provides 8 microphone pre-amplified inputs using DB-25 connectors,
following the StudioHub+ wiring standard. Trim pots to the left of the slot provide precise level
adjustment. LED lamps above the connector will flash as a meter to show audio presence.
 TIP: The trim pots must be used for gain changes of more than 4 dB to preserve the
signal to noise ratio!

See Appendix C for connector pinouts.
JSM-DIN-RJ Digital Input Card
The JSM-DIN-RJ card provides 4 AES/EBU or S/PDIF digital inputs using RJ-45 connectors, following
the StudioHub+ wiring standard. The reference level may only be set using AE Config software. The
top LED will blink like a meter when audio is modulating; the bottom LED will turn on solid when a
valid digital signal is present.

See Appendix C for connector pinouts.
JSM-DIN-DB Digital Input Card
The JSM-DIN-DB card provides 8 AES/EBU or S/PDIF digital inputs using a DB-25 connector. The
reference level may only be set using AE Config software. LED lamps above the connector will flash
as a meter to show audio presence.

See Appendix C for connector pinouts.
Logitek JetStream MINI Reference Manual 24