Logitek Electronic Systems JetStream Audio Networking Platform User Manual
Page 17
AUDIO NET 2: Located on the DSP card. This is a gigabit Ethernet connection. When automatic
failover is implemented, this will be the secondary audio network. As of this writing, this is the
only active audio network port. The audio network cable should be connected here.
ADMIN NET: Located next to the USB ports. This is the administrative LAN connection used to
configure and control the unit. No audio is passed on this network, therefore it may be connected
to the office network without concern. This is a Gigabit Ethernet connection, although it can
connect to a 10/100 network if Gigabit is not available.
RESET: Used to perform a hardware reset of the DSP card. The button is recessed; use a pen or
pencil tip to depress.
Second Generation JetStreams do not have LED power, PC, or DSP lights on the back. Those
indicators are only on the front panel.
Logitek JetStream MINI Reference Manual
17