Linx Technologies MDEV-xxx-ES - Manual (Page 4)

– – – – 2 3
1
2
3 4
5
6
7
8
9
15
10
11
12
13
14
Ordering Information
Ordering Information
Part Number Description
MDEV-***-ES-USB ES Series Master Development System - USB
MDEV-***-ES-232 ES Series Master Development System - RS-232
*** = 869, 916MHz
Figure 2: Ordering Information
ES Series Transmitter Development Boarad
1. 9V Battery
2. DC Power Jack
3. On-Off Switch
4. Voltage Regulator
5. Host Interface Module
6. Prototype Area
7. Break-Out Header
8. ES Series Transmitter 9. RP-SMA Antenna Connector
10. MS Series Encoder
11. Baud Rate Selector Switches
12. MODE_IND LED
13. CREATE button
14. Buzzer Button (S3)
15. Relay Button (S2)
Figure 3: ES Series Transmitter Development Board
The Master Development System includes 2 development boards, one
set up for the transmitter and the other for the receiver, 2 ES Series
transmitters*, 2 ES Series receivers*, two CW Series antennas, 2 9V
batteries, demonstration software and full documentation.
*One part is soldered to the board, one extra for use on your first prototype board.