LinPlug SaxLab - Manual (Page 8)

The audio outputs of SaxLab 2 are automatically connected to the input of
your host software's mixer. Here you can set the pan position of SaxLab 2's
output. Hopefully, this section has given you a brief overview of how SaxLab 2
works. More detailed information can be found in the following sections.
Main
SaxLab 2’s Main section is located in the middle of the instrument’s Front
Panel. It contains controls for selecting the current Sound Set as well as for
setting the relative levels of the instrument’s three sound layers. It also
contains a MIDI indicator that shows when incoming MIDI Note-on messages
are received.
Sound Set: SaxLab 2’s Sound Set control is used for selecting the current
Sound Set. Each Sound Set is a collection of samples that the instrument
uses to generate sound. Each Sound Set is made up of three layers: the Main
layer, the Air layer and the Keys layer. These three layers are mixed to
produce the instrument’s overall sound. The Sound Set should not be
confused with a Preset. The former is a collection of samples used by the
instrument, while the latter is a “snapshot” of all the instrument’s current
SaxLab 2.1.6 User Manual Page 8