Bang & Olufsen BeoVision 8-40 User Guide (pre Aug 2010) - Manual (Page 48)

48 >> Set up the television
The diagrams on these two pages outline
how to set up the tele vision with video
sources and loud speakers, and how to expand
the set up, for example with a compatible
Bang & Olufsen audio system, or with a
computer.
Refer to ‘Connection panels’ on page 50 for
further information about each of the sockets.
Refer to ‘Register additional video
equipment’ on page 28 for further
information about how to set up connected
equipment for use.
Video signals
Connect your video signal sources, such as cable
or aerial to the sockets mentioned on the diagram.
Loudspeakers
The television has built­in loudspeakers. However,
you can expand the system into a surround sound
setup – including a sub woofer. Refer to ‘Loud-
speaker setup – surround sound’ on page 30 for
further information.
Remember to set the L – R switch on each loud-
speaker to L and R (the left and right sound channel,
respectively).
Additional video equipment
The sockets on the connection panel allow you to
have different types of video equipment connected
at the same time. We expect your Bang & Olufsen
retailer to deliver, install and set up your products.
Equipment with HDMI™ input
Equipment with HDMI input can be connected to
any of the HDMI sockets, regardless of the
particular AV socket to which you have connected
the equipment.
Connections
POWER LINK
SUB
POWER LINK
REAR
POWER LINK
FRONT
DVB
AERIAL