Bang & Olufsen BeoVision 8-40 User Guide (pre Aug 2010) - Manual (Page 22)

22
The BeoLink system makes it possible
to distribute picture and/or sound to
other rooms throughout the house.
If you have a BeoLink distribution
system installed, and your television
is equipped with the optional System
Module, you can either use your
television in the main room, such as a
living room, or in a link room, such as
a study or bedroom.
BeoLink – Distribute sound and picture
The main room system must be connected to
the link room system with a Master Link
cable.
> Connect the Master Link cable to the MASTER
LINK socket on the television.
> If you want to distribute video signals as well,
connect an ordinary aerial cable to the socket
marked ‘RF OUT’ on the tele vision. Then run the
aerial cable to the RF Link Amplifier and the
Master Link cable to the link room and follow
the instructions enclosed with the link room
equipment.
If an audio system is already connected to the
MASTER LINK socket and you wish to connect
more equipment, then the Master Link cable must
be split in two and joined with the cable from the
link room using a special junction box. Contact
your Bang & Olufsen retailer for assistance.
Digital signals cannot be distributed from a main
room television to the link room system.
Link connections
MASTER
LINK
RF OUT AERIAL
RF Link
Amplifier
To the MASTER LINK socket on the
link room system
Video signal distribution to link
rooms