Bang & Olufsen BeoVision 8-40 User Guide (pre Aug 2010) - Manual (Page 33)

33
While you are watching a movie or
programme, you can choose the speaker
combination you wish to switch on, provided
that the various sound modes are available in
your system.
The television may switch on a speaker
combination automatically. This happens if a
programme or DVD contains information
about the number of speakers to be switched
on. You are still free to choose the speaker
combination you prefer.
To choose a speaker combination …
> Press LIST on Beo4 until SPEAKER is shown in
the Beo4 display.
> Press the number of the speaker combination
you want. The selected speakers cut in
automatically.
> If you want to adjust the sound balance for the
programme you are watching, press or to
adjust the balance between the external front
and rear speakers, and press or to adjust
the balance between the left and right speakers.
> Press EXIT to remove SPEAKER from the Beo4
display and to return to the source you were
using.
Speaker combinations
SPEAKER 1 … Sound in the centre speaker only.
SPEAKER 2 … Stereo sound in the front speakers.
Subwoofers are active.
SPEAKER 3 … The centre speaker, front speakers
and subwoofers are active.
SPEAKER 4 … The front speakers, surround
speakers, and subwoofers are active.
SPEAKER 5 … Surround sound from all speakers
and subwoofers.
If you only have connected a pair of front speakers
to the television, you can only choose SPEAKER 1–3.
Choose a speaker combination