Bang & Olufsen BeoVision 8-40 User Guide (pre Aug 2010) - Manual (Page 38)

38 >> Edit tuned channels
Adjust tuned TV channels – manual tuning
You can store TV channels on channel
numbers of their own. Fine tune the channel
reception, indicate the presence of coded
channels and choose appropriate sound types
for the individual channels.
> Press TV to switch on the television.
> Press MENU to bring up the TV SETUP menu.
TUNING is already highlighted.
> Press GO to bring up the TUNING menu and
press to highlight MANUAL TUNING.
> Press GO to bring up the MANUAL TUNING
menu.
> Press or to move between items on the
menu.
> Press or to view your choices for each item.
> If you choose NAME, then press the green button
to start the naming procedure. Use or and
to enter the characters in the name you
choose.
> When you have finished editing, press GO to
store the adjusted channel.
> Press EXIT to exit all menus.
The item TV SYSTEM appears on the menu, then
make sure that the correct broadcast system is
displayed before you begin tuning.
If channels are broadcasted with two languages
and you want both languages, you can store the
channel twice, once with each language.
Even though you store a type of sound/language,
you can switch between the various types while
watching a TV channel. For further information,
refer to the chapter ‘Adjust sound and picture
format’ on page 8.