Cautions – Bang & Olufsen BeoVision 12 (Wall Bracket) User Manual
Page 4
English
– The product can only be switched off
completely by disconnecting it from the mains
socket. The mains socket must always be
accessible.
– Do not expose this equipment to dripping or
splashing and ensure that no objects filled with
liquids, such as vases are placed on the
equipment.
– No naked flame sources, such as lighted candles
should be placed on the product.
– Make sure the cable connection between the
product and the router does not exit the
building to avoid contact with high voltage.
– To prevent the spread of fire, keep candles or
other open flames away from this product at all
times.
– Due to the heavy weight of the product, any
moving or lifting of the product should be
performed by qualified personnel – using the
proper equipment.
– Place your product on a firm, stable surface.
– The product is not designed to stand on its own.
It must be supported until mounted. To prevent
injury, use Bang & Olufsen approved wall
brackets only!
– Ensure that the product is positioned, set up
and connected in accordance with the
instructions in this Guide.
– Do not subject the product to rain, high
humidity or sources of heat.
– Do not strike the glass with hard or pointed items.
– If the product is equipped with a grounded
mains lead and 3-pin plug, the product shall be
connected to a mains socket wall outlet with a
protective earth connection. The ground pin of
the mains plug must not be removed, due to
the danger of electric shock. If a wall outlet
with protective earth is not available, an
electrician should be contacted.
WARNING: To reduce the risk of fire or electric
shock, do not expose this appliance to rain or
moisture.
The lightning flash with arrowhead
symbol within an equilateral triangle,
is intended to alert the user to the
presence of un insulated “dangerous
voltage” within the product’s en closure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equi-
lateral triangle is intended to alert the
user to the presence of important
operating and main tenance (servicing)
instructions in the literature accompanying the
product.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Cautions
Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
Unplug this apparatus during lightning storms or
when unused for long periods of time. Refer all
servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not ope rate
normally, or has been dropped.
More information on:
Dansk (Danish)
– Produktet er meget tungt og bør derfor kun
flyttes eller løftes af uddannede
serviceteknikere, der bruger det rigtige udstyr.
– Anbring produktet på en solid og stabil overflade.
– Produktet er ikke beregnet til at stå alene.
Det skal støttes, indtil det er monteret. Brug kun
godkendte Bang & Olufsen vægbeslag for at
undgå personskade!
– Sørg for, at produktet placeres, opsættes og
tilsluttes i overensstemmelse med instruktionerne
i denne vejledning.
– Udsæt ikke produktet for regn, høj luftfugtighed
eller stærk varme.
– Skærmen må ikke berøres med hårde eller
spidse genstande.
– Hvis produktet er udstyret med en jordet
netledning (et 3-benet stik), skal det tilsluttes
en stikkontakt med beskyttet jordforbindelse.
Benet med jordforbindelse i strømstikket må
ikke fjernes, da der er fare for elektrisk stød.
Kontakt en elektriker, hvis der ikke er adgang
til en stikkontakt med beskyttet jordforbindelse.
Yderligere oplysninger findes p
Deutsch (German)
– Wegen seines hohen Gewichts sollte das Gerät
nur von qualifiziertem Personal und mit geeigneten
Hilfsmitteln angehoben und bewegt werden.
– Stellen Sie Ihr Gerät immer auf eine feste und
stabile Oberfläche.
– Das Gerät kann nicht eigenständig stehen und
muss bis zur finalen Montage gestützt werden.
Um Verletzungen zu vermeiden, benutzen Sie
ausschließlich von Bang & Olufsen zugelassene
Wandhalterungen!
– Achten Sie darauf, dass das Gerät den Anweisungen
in dieser Bedienungsanleitung entsprechend
aufgestellt und angeschlossen wird.
– Setzen Sie das Gerät nicht Regen, hoher
Feuchtigkeit und Wärmequellen aus.
– Stoßen Sie nicht mit harten oder spitzen
Gegenständen an die Glasscheibe des Bildschirms.
– Falls das Produkt mit einem geerdeten Netzkabel
und 3-poligem Stecker ausgestattet ist, darf es
nur an eine Wandsteckdose mit Schutzkontakt
angeschlossen werden. Der Massepunkt des
Netzsteckers darf nicht entfernt werden, sonst
besteht die Gefahr elektrischer Schläge. Ist keine
Wandsteckdose mit Schutzkontakt vorhanden,
muss ein Elektriker hinzugezogen werden.
Weitere Informationen erhalten Sie unter:
Español (Spanish)
– Dado el elevado peso del equipo, cualquier
desplazamiento o elevación del mismo debe
ser llevado a cabo por personal autorizado
y empleando herramientas adecuadas.
– Coloque el equipo sobre una superficie firme
y estable.
– El equipo no ha sido diseñado para descansar
en posición vertical sin sustento. Hasta su
instalación en un soporte, deberá permanecer
sujeto. A fin de evitar posibles lesiones, use
exclusivamente soportes de pared homologados
por Bang & Olufsen.
– Asegúrese de que el equipo quede colocado,
instalado y conectado de acuerdo con las
instrucciones que contiene esta Guía.
– No someta el equipo a niveles elevados de
humedad, a la lluvia o a fuentes de calor.
– No golpee el vidrio con objetos duros o puntiagudos.
– Si el cable de alimentación del que dispone
el equipo cuenta con conexión a masa y un
enchufe de 3 patillas, deberá conectar este
último a una toma de suministro eléctrico
dotada de conexión de seguridad a tierra.
No desmonte la patilla de conexión a masa con
la que cuenta el enchufe de alimentación; ello
elevaría el riesgo de descarga eléctrica. Si no
dispone de una toma de suministro eléctrico
con conexión de seguridad a tierra, póngase
en contacto con un electricista.
Más información en:
Français
(French)
– En raison du poids du produit, tout déplacement
doit être effectué par du personnel qualifié,
doté d’un équipement de levage approprié.
– Placez le produit sur une surface solide et stable.
4