Toshiba DynaPad WT12PE-A64 - Manual (Page 39)

39 Getting Started
Adding memory
Adding memory
Toshiba will not be responsible for any product damage, data
loss, service or part replacement made necessary by
improper installation of a memory module.
Connecting to a power source
Your device requires power to operate. Use the Micro
USB/AC adaptor to connect the device to a live electrical
outlet, or to charge the device’s battery.
Never pull on a power cord/cable to remove a plug from
a socket. Always grasp the plug directly. Failure to follow
this instruction may damage the cord/cable, and/or result
in a fire or electric shock, possibly resulting in serious
injury.
Always confirm that the Micro USB/AC adaptor (and
extension cable plug if used) has been fully inserted into
the socket, to ensure a secure electrical connection.
Failure to do so may result in a fire or electric shock,
possibly resulting in serious injury.
Be careful if you use a multiple connector. An overload on
one socket could cause a fire or electric shock, possibly
resulting in serious injury.
Always use the TOSHIBA Micro USB/AC adaptor that
was provided with your device, or use Micro USB/AC
adaptors specified by TOSHIBA to avoid any risk of fire
or other damage to the device. Use of an incompatible
Micro USB/AC adaptor could cause fire or damage to the
device possibly resulting in serious injury. TOSHIBA
assumes no liability for any damage caused by use of an
incompatible adaptor.