Toshiba DynaPad WT12PE-A64 - Manual (Page 140)

140 If Something Goes Wrong
Connecting to the Internet
3 Touch Yes in the User Account Control prompt.
4 If the network adapter and TCP/IP are functioning
correctly, you should receive a response that looks
similar to the following:
(Sample Image) Command Prompt window
If you receive an error message at this point, TCP/IP may not
be properly installed. To remove and reinstall TCP/IP,
perform the following steps:
1 In the command prompt window type netsh int ip
reset resetlog.txt (with the spaces as indicated) and
press or touch ENTER .
(Sample Image) Command Prompt window