Lanner LEC-2026 - Manual (Page 25)

LEC-2026
25
2.2 The Front and Back Panel
This section describes the front and back panel of LEC-2026.
Figure 4 － LEC-2026 Front View
• Console Port: The console port cable connects LEC-2026 to the host PC
via a console cable.
The Default baud rate is 115200
• LAN Connector: It requires an Ethernet RJ-45 cable to connect to
the port
z
USB Port: Two USB type 2.0 ports are provided for easy connection of
USB devices. Besides these ports, there is also an internal header
for connecting USB interface cable.
LED Color Status Description
Green
On Indicates when LEC-2026 power is switched
ON PWR
N/A Off No power connected
Yellow On Hard disk is being accessed
HDD
N/A
Off No Data is being accessed or no HDD
provided
Status It is a programmable LED. Lanner provides
sample codes for the status LED (refer to the
Driver/ Manual CD, under “LED Status” for
Amber Flash LAN link / active
Amber On Data is being accessed in 1G speed
Green On Data is being accessed in 100M speed
Giga
Ethernet Ports
Link/ACT &
Speed
N/A Off Data is being accessed in 10M speed
USB
Console
LED Status
Gigabit LAN Port 3, 4, 5, and 6
(capable of PXE)
Gigabit LAN Port 1 and 2
(capable of LAN Bypass and PXE)