Lanner LEC-2026 - Manual (Page 11)

LEC-2026
11
2.1.3 Jumper Settings and I/O Connectors
This section lists jumper settings and I/O connectors of the MB-7530 board
which are specific to the LEC-2026 system. Changing these settings may
result in malfunctions or damage to your system.
Jumper Settings and I/O Connector Summary for MB-7530：
JUMPER FUNCTION
J4 Clear CMOS (Pin Header 1x3 2.54mm)
J5 Adapter DC Jack
J6 VGA Connector(Pin Header 2x6 2.54mm)
J7 USB Connector(Pin Header 2x5 2.54mm)
J8,J9 SATA Connector
J10 Keyboard/Mouse Connector(Pin Header 2x4 2.54mm)
J11 COM Pin Header(2x5 2.54mm)
J18 Reset Pin Header
SW1 Reset bottom
SW2 Power on Switch
COM1 RJ-45 Console connector
FAN1 FAN Connector(WAFER 3P 2.54mm)
CON2 SATA Power On Connector(WAFER 4P 2.54mm)
USB1 USB connector 8P 2.54mm
CN2 Compact flash connector
CONN1 Reset Connector(Pin Header 1x2 2.54mm)
CON1 Mini-PCI connector
CN1 DDRII socket SO-DIMM 200P
LAN3-LAN6 RJ-45 LAN connector (provided by Intel 82541PI)
LAN1-LAN2 RJ-45 LAN connector (provided by Intel 82574L, Bypass Pair)