Lanner VES-310 V2 - Manual (Page 9)

9
System Components
Chapter 2
Embedded and Industrial Computing
F1 Two USB 2.0 Ports
It connects to any USB devices such as a flash drive. Besides this one, there are other two ports via pin
headers on the board.
F2 Two 10/100/1000Mbps LAN ports: LAN2-left, LAN1-right
Using suitable RJ-45 cable, you can connect VES-310 to a computer, or to any other piece of equipment
that has an Ethernet connection, for example, a hub or a switch. Moreover, both of them have Wake-
on-LAN and Preboot Execution Environment capabilities.
LED Behavior Interpretation
LINK/ACT (Left, Yellow) On/Flashing The port is linking.
Off The port is not linking.
SPEED (Right, Green/Amber) Amber The connection speed is 1000Mbps.
Green The connection speed is 100Mbps.
Off The connection speed is 10Mbps.
F3 VGA Port
It is a DB-15 Female ConnectorUsing suitable DB-15 cable, you can connect an appropriate device such
as a monitor.
F4 Power Adapter socket with Lock
DC-in 12V jack. Only use the power adapter supplied with the VES-310 System.
F5 Power-on Switch
It is a switch to turn on or off the power.
F3 F1 F5 F2 F4