Lanner Digital Input/Output User Manual

Page 25

Software User Manual

Version 1.0

Winbond W83627UHG superI/O: The index address is 2EH.

W83627UHG_test Monitor CPUTIN //Get CPU temperature

W83627UHG_test Monitor 5Vcc //Get ٛ uperior’s 5V voltage

W83627UHG_test Monitor 5Vsb //Get Super IO’s standby voltage

W83627UHG_test Monitor Avcc //Get Super IO’s IO voltage

W83627UHG_test Monitor CPUVCore //Get CPU voltage

W83627UHG_test Monitor Vbat //Get battery voltage

W83627UHG_test Monitor 3V3 //Get other voltage

W83627UHG_test Monitor 1V5 //Get other voltage

Note: Refer to Appendix A for more information on Register (page 55 of

W83627 datasheet)

Note:
Specific to the PCH chipset used or Super IO chipset, the commands and functionality vary
depending on product models. For more information, refer to the README or User Guide contained
within the utility folder.

Watchdog Timer:

Enter the number of seconds to start count down before the system can be reset. Press
start to start the counter and stop to stop the counter.

The corresponding commands:

Winbond W83627UHG superI/O: The index address is 2EH.

W83627UHG_test Watchdog //Show the timer remained
W83627UHG_test Watchdog timeout_value //Set the watchdog timer
timeout value

Note: Refer to Appendix B for more information on Register (page 172,
173of W83627UHG datasheet)